News Center

News Center

NEWS CENTER

President of India's Mittal Steel Group visits our company for inspection

Release Time:

2014-07-02 16:45

Source:

The President of India's Mittal Steel Group visited Hubei Langchi New Materials Co., Ltd. on June 29, 2014, mainly to understand the application of silicon carbide products in the steel industry. During the visit and discussion, he showed great interest in the silicon carbide ceramic idler rollers produced by our company and hopes to establish long-term cooperation in the future!

　　On June 29, 2014, the President of India's Mittal Steel Group visited Hubei Langchi New Materials Co., Ltd. The visit mainly focused on understanding the application of silicon carbide products in the steel industry. During the visit and discussions, he showed great interest in our company's silicon carbide ceramic idler rollers and hopes to establish long-term cooperation in the future!

 

President of India's Mittal Steel Group Visits Our Company for Inspection

 

President of India's Mittal Steel Group Visits Our Company for Inspection

Previous Page

Professor Zhu from Wuhan University of Technology and his team visited our company for an inspection.

Zhengchuang has a "new look"!

Next Page

Related News

Cubic Nanometer Silicon Carbide Micropowder

Cubic nanometer silicon carbide micropowder, also known as β-silicon carbide, β-SiC is close to diamond, with surface finish and polishing performance far superior to white corundum and α-SiC (black silicon carbide and green silicon carbide); at temperatures above 1600°C, β-SiC still possesses ultra-high strength; β-SiC has several times higher electrical conductivity than α-SiC; β-SiC has excellent thermal conductivity and low expansion coefficient, resulting in minimal thermal stress during heating and cooling; β-SiC is a low-temperature crystal form and can undergo a phase transformation above 1800°C; in terms of specific gravity, β-SiC is half that of most alloys, 40% that of steel, and roughly the same as aluminum.

Cubic Nanometer Silicon Carbide Micropowder

Cubic nanometer silicon carbide micropowder, also known as β-silicon carbide, β-SiC is close to diamond, with surface finish and polishing performance far superior to white corundum and α-SiC (black silicon carbide and green silicon carbide); at temperatures above 1600°C, β-SiC still possesses ultra-high strength; β-SiC has several times higher electrical conductivity than α-SiC; β-SiC has excellent thermal conductivity and low expansion coefficient, resulting in minimal thermal stress during heating and cooling; β-SiC is a low-temperature crystal form and can undergo a phase transformation above 1800°C; in terms of specific gravity, β-SiC is half that of most alloys, 40% that of steel, and roughly the same as aluminum.

Basic Knowledge of Silicon Carbide

Silicon carbide includes black silicon carbide and green silicon carbide. Among them, black silicon carbide is made primarily from quartz sand, petroleum coke, and high-quality silica through high-temperature smelting in a resistance furnace. Its hardness lies between corundum and diamond, with mechanical strength higher than corundum, and it is brittle and sharp.

Application and Development of Ceramics in Automotive Coating

In recent years, ceramic thin-film spraying technology, widely used in aerospace technology, has begun to be applied in automobiles. The advantages of this technology include excellent heat insulation, the ability to withstand high temperatures and high pressure, mature processes, and stable quality. To achieve the goal of low heat dissipation, ceramic spraying can be applied to engine combustion chamber components, such as zirconia sprayed on the piston top and zirconia sprayed on the cylinder liner. Engines treated in this way can reduce heat loss, lighten the engine's own weight, reduce engine size, and decrease fuel consumption. Classification and characteristics of ceramics The performance of ceramics is determined by two factors. The first is the material structure, mainly the nature of chemical bonds and

Development Trends of Silicon Carbide Products

Silicon carbide products are increasingly used in petroleum, chemical, automotive, machinery, and aerospace fields. There is an urgent need to continuously improve manufacturing technology and reduce production costs while enhancing the performance of silicon carbide products. Achieving low-temperature sintering of silicon carbide products can significantly reduce energy consumption, markedly lower production costs, and promote the industrialization of silicon carbide products.

中企跨境-全域组件 制作前进入CSS配置样式

在线客服添加返回顶部

右侧在线客服样式 1,2,3 1

图片alt标题设置： Remember to modify: Hubei Zhengchuang New Material Technology Co., Ltd.

表单验证提示文本： Please enter content!

循环体没有内容时： Sorry, content is being added

CSS / JS 文件放置地